-
Products
-
Support & Service
-
About Us
RTI provides complete quality assurance solutions for all X-ray modalities and facilities.
We have ”click & go” solutions for your X-ray quality assurance. Everything between basic service to specialists. Each product comes with a 24 month factory warranty which can be extended – up to 10 years. -
Contact
RTI Group AB
Flöjelbergsgatan 8C
SE-431 37 MÖLNDAL Sweden
Phone +46 31 746 36 00
Accessories
-
RTI Light Probe
Light Detector measures the brightness on monitors and film viewing boxes.
-
RTI Dose Probe
The RTI Dose Probe is specially designed for low dose rate measurements.
-
RTI T20 Dose Detector
T20 dose detector is small enough to leave the X-ray system's output undisturbed.
-
RTI CT Dose Profiler
A Pioneer at Measuring CT Dose. It also has the ability to further analyze the result.
-
RTI MAS-1
The MAS-1 Probe is an invasive probe for the measurement of mA (tube current) and mAs. Together with Piranha or Cobia Sense, direct readings of mA and mAs as well as waveform are obtained.
-
RTI MAS-2
The MAS-2 Probe is a clamp-on probe for non-invasive measurement of mA (tube current) and mAs. The major advantages are that the probe is easy to use and safe.
-
CT Ion Chamber 10 cm
Measure CT dose together with the Piranha, Cobia or Barracuda.
-
CT Ion Chamber 30 cm
The CT Chamber 30 cm is specially developed for free in air measurementson wide beam CT scanners.
-
Magna 1 cc
Designed especially for mammographic measurements.
-
DAP Chamber
The DAP Chamber is the perfect tool for field calibration of orthodontic X-ray equipment. You can measure with just one click – fast, easy and accurate.
-
RTI Mover
In situations when the CT has a fixed patient table, the Mover helps the CT Dose Profiler to slide through the CT X-ray field at a constant speed.
-
RTI Loni Mover
You need accurate results you can depend on, with maximum precision, and you need them fast. Get accurate and repeatable measurements with the new Loni Mover™. It is so easy to use you will reduce scanner down-time too.
-
HVL Stands
Adjustable stand for easier positioning of the HVL filter RTI Dose Probe, Piranha device, Barracuda MPD and R100.
-
Filter Holder
Filter holders for 33 x 33 and 100 x 100 mm filter size.
-
HVL Filter Kit
Type 1100 Aluminium (99%) filter set. 14 filters included.
-
U-shaped Scatter Holder
Stand to fixate RTI Dose Probe in defined positions for scatter measurements on DXA systems.
-
Cobia Vertical Holder
The Cobia Vertical Holder is designed for attaching the Cobia to vertical surfaces like a wall bucky, or Cone Beam X-ray units.
-
Piranha Panoramic Holder/Vertical Holder v.4
This holder is designed for attaching the Piranha to dental panoramic equipment or vertical mounting. T
-
Piranha Mammo Holder
The Piranha Mammo Holder is developed for easy positioning of the Piranha in the reference point for almost every mammo unit.
-
Philips Piranha Holder
Positioning of Piranha on Philips EDL-stand.
-
Philips Dose Probe Holder
Positioning of RTI Dose Probe on Philips EDL-stand.
-
GE Piranha Holder for Pristina
The GE Piranha Holder is developed for use with the GE Mammo IQST Jig and the Senographe Pristina from GE.
-
GE Vascular Holder
The GE Vascular Holder is designed for accurate positioning of the Piranha and Barracuda Dose Probes on the GE Vascular system.
-
GE Dose Probe Holder
The Dose Probe Holder is designed for accurate positioning of the Piranha and Barracuda Dose Probes.
-
GE Piranha Holder and Stand D8
This stand includes a base plate that can be used as a holder for the Piranha main unit. This allows accurate positioning of the Piranha for special applications.
-
CT Phantom Set
Phantoms for dose measurements on CT scanners. The phantom set consists of one 16 cm head phantom with 5 holes, and a 32 cm body annulus with 4 holes.
-
Head Phantom
Head phantom for CT measurements. 16 cm diameter, 5 holes.
-
Adapter Plug for CT Ion Chamber
Adapter for the CT Ion Chamber to fit the CT Phantom.
-
Ruler set Nova Rad
The Nova Rad is dedicated to check and document light field/x-ray field alignment.
-
Display unit
10” Tablet PC display for wireless or USB communication with Piranha, Cobia Flex and Cobia Sense.
-
RTI Slit Camera
The RTI Slit Camera for X-ray focal spot measurements, to assure that the tube and X-ray tube focal spot size is within acceptable limits. The Slit Camera can be rotated 90 degrees in the Slit Camera holder.
-
RTI Chamber Adapter
With the addition of the chamber adapter, Piranha, Cobia Flex and Cobia Sense owners have the choice to use ion chambers with their instrument.
-
BNT and TNT Adapters and Cables
Connect various types of chambers to Piranha and Barracuda.
-
Visi-X
Field position analyzer that saves time and money. The Visi-X can also be used for checking of the centering of the bucky tray.
-
Piranha Premium ALU Case
Made of light-weight aluminum, the Piranha Premium ALU Case is attractive and just “the right size” to provide a space for the Piranha and all its accessories included in the popular Piranha Premium Kits.
-
Piranha Premium Outdoor Case
A tough, dent-resistant, transport for your Piranha Premium System.
-
RTI Soft Shell Case
RTI's soft shell case is a perfect solution for storage of your Cobia or Piranha. The soft shell case fits perfectly for the Cobia Smart or Piranha and is smooth, easy and safe.
-
Survey Meter Outdoor Case
Made with a rugged, high impact polypropylene exterior, this case is water proof and can take a beating. Inside, it also includes space for the Cobia.
-
Visi-X Case
Keeps your Visi-X in a perfect environment.
-
Cobia ALU Case
The Cobia ALU Case is a hard case for transportation and storage of Cobia with accessories.
