Support & Service
RTI provides complete quality assurance solutions for all X-ray modalities and facilities.
We have ”click & go” solutions for your X-ray quality assurance. Everything between basic service to specialists. Each product comes with a 24 month factory warranty which can be extended – up to 10 years.
RTI Group AB
SE-431 37 MÖLNDAL Sweden
Phone +46 31 746 36 00
CT Ion Chamber 10 cm
Ionization Chamber for CTDI Measurements
The DCT10 is a rugged, cylindrical pencil-shaped air ionization chamber for CTDI measurements. The CT chamber is intended for measuring and monitoring the exposure output level of CT scanners in a phantom or free-in-air.
CT dose index, CTDI, can be measured in accordance with IEC 61223-2-6.
The DCT10 RS can be connected directly to the Barracuda (via an electrometer module supporting bias) to measure CTDI.
Art. No. 9705111-00
Ranges with Piranha & Cobia Flex
(Chamber Adapter required)
|Air kerma rate||0.8 mGycm/s to 8 Gycm/s|
|Inaccuracy||±6 % or ±0.08 mGycm/s|
|Connector type||LEMO triaxial|
|Cable||2 m, low noise triaxial|
|Active volume||4.9 cm3|
|Active length||100 mm|
|Inner diameter||8.0 mm|
|Typical leakage||±4 fA|
|Radiation quality||80 - 150 kV|
|Sensitivity||400 nC/Gy or 3.5 nC/R|
How-to: CTDI Measurement with Ion Chamber and Black Piranha
This instructional video will show you how to make a CTDI measurement using CT Ion Chamber and the Black Piranha.