RTI Scatter Probe
A leakage and scatter detector in one!
The RTI Scatter Probe is our revolutionary solid-state detector for leakage and scatter detection in X-ray environments.
Its unique design – two separate detector areas of 10 cm² and 100 cm² – fulfills current regulations and standards for X-ray leakage and scatter measurements (complies with the relevant 21 CFR and IEC 60601 standards). The Scatter Probe connects to our world-leading Ocean Next™ software for measurement reading and reporting.
Download the RTI Scatter Probe brochure.
Watch the Scatter probe How-to film >
$5,250
Reliable dosimetry
For barrier, leakage, and scatter measurements various industry standards apply.
- 21 CFR 1020.32
- 21 CFR 1020.30
- IEC 60601-2-54
- IEC 60601-1-3
There are several more standards for various modalities.
Detector area
Common for all these standards is that the measurement must be made covering an area of 10 cm² or 100 cm² at a certain distance. The detector areas of the RTI Scatter Probe ensure full compliance with these standards.
It does not matter if your scatter and leakage application require measurements at a short distance, long-distance, in a fixed position, or sweep, with a click you can select the 10 cm² or 100 cm² area for your measurement.
Quick and easy positioning
Stand on a table, use by hand, or mount on the included tripod, the RTI Scatter Probe is quick, simple, and easy to position.
The anti-slip surface also allows safe positioning facing upwards without sliding.
With the standard camera tripod thread, the probe can be mounted to any tripod or jig.
-
Connector type USB Type C Cable 5 m USB A to C
Extendable with optional USB
Active extension cablePower 5 V via USB Active area 10 cm² and 100 cm² Dimensions 139 x 139 x 17 mm Weight 370 g (430 g incl. handle) Rated range of use 10 - 150 keV
80 - 110 kPa
+10 - +40 °C
10 - 80% rel. humidityTrig Mode Auto or Manual Trig Level (auto) 5 μGy/h (0.6 mR/h)
or 10 μSv/hAir Kerma Rate 0 - 100 mGy/h (0 - 10 R/h)
±10% or ±0.3 μGy/h, 0.03
mR/h (ISO N20-N150)Air Kerma 0 - 999 Gy (0 - 999 R)
±10% or ±0.3 μGy/h, 0.03 mR/h
(ISO N20-N150)H*(10) Rate 0 - 200 mSv/h
±10% or ±0.6 μSv/h
(ISO N20-N150)H*(10) 0 - 999 Sv
±10% or ±0.6 μSv/h
(ISO N20-N150)Mean Energy 10 - 150 keV
±10% or 5 keV
(min rate: 25 μGy/h)Half Value Layer (HVL) 0.1 - 17 mm Al
±10% or 0.05 mm Al
(min rate: 25 μGy/h)Time 0-9999 s Sampling Rate 1-300 Hz
(Bandwidth 0.5 - 50 Hz)