RTI Dose Probe
For low dose rate measurements
The RTI Dose Probe is an external dose probe designed to perform very low dose rate measurements, for instance, on image intensifiers.
Use with Piranha, Cobia Dental, Cobia Flex, or Cobia Sense. (The probe can also be used with the Mako system using a Mako Legacy Module.)
The probe is very small to avoid or minimize interference with AEC (Automatic Exposure Control) on X-ray equipment. This also enables it to fit into the table bucky.
Since it is a solid-state detector, no corrections for pressure or temperature are needed. Neither is polarizing voltage.
Dose probe for Fluoroscopy
The RTI Dose Probe has a fast response which makes it ideal for pulsed fluoroscopy. It can detect individual pulses, determine pulse rate, and show waveform at dose rate.
The Dose probe comes calibrated for input dose rate to image intensifiers (beam quality W/23 mm Al (R2)). Other calibrations are available as well.
$1,523
-
Size 20 x 45 x 7.4 mm, 0.79" x 1.8" x 0.29" Weight 85 g (3 oz) Cable length 2.0 m (6.6 ft) Backscatter protected Yes Dose 100 pGy – 1.5 kGy. 12 nR – 170 kR (± 5%) Dose rate 4 nGy/s – 150 mGy/s (±5 % or ±10 nGy/s).
0.46 μR/s – 16 R/s (±5 % or ±1 μR/s).
26 μR/min – 1000 R/min (±5 % or ±6 μR/min).Time 0.1 ms – 34000 s (±1 % or ±0.5 ms) Pulses 1 – 65535 pulses (±1 pulse) Dose per pulse 1 nGy/pulse – 0.3 Gy/pulse Pulse rate/frequency 0.5 – 100 Hz Pulse width 4 ms - 2000 s -
Size 20 x 45 x 7.4 mm, 0.79" x 1.8" x 0.29" Weight 85 g (3 oz) Cable length 2.0 m (6.6 ft) Backscatter protected Yes Dose 6 nGy - 2 kGy. 660 nR - 250 kR (± 5%) Dose rate 220 nGy/s - 220 mGy/s. 1.5 mR/min - 1.5 kR/min (± 5%) Time 0.33 ms – 9999 s Pulses 3 – 9999 pulses Dose per pulse 1 nGy/pulse - 3 kGy/pulse. 114 nR/pulse - 342 kR/pulse Pulse rate/frequency 1/6 - 260 Hz