RTI Scatter Probe
A leakage and scatter detector in one!
The RTI Scatter Probe is our revolutionary, rugged, flat, solid-state detector for leakage and scatter detection in X-ray environments.
Its unique design – two separate detector areas of 10 cm² and 100 cm² – fulfills current regulations and standards for X-ray leakage and scatter measurements. Connects to our industry-leading Ocean Next™ software, via a USB, for reading and reporting.
All prices include freight cost. Pricing does not include Applicable Taxes or Customs Fees.
For barrier, leakage, and scatter measurements various industry standards apply.
- 21 CFR 1020.32
- 21 CFR 1020.30
- IEC 60601-2-3
- IEC 60601-2-54
- IEC 60601-1-3
There are several more standards for various modalities.
10 cm² or 100 cm² – full compliance
Common for all these standards is that the measurement must be made covering an area of 10 cm² or 100 cm² at a certain distance. The detector areas of the RTI Scatter Probe ensure full compliance with these standards.
It does not matter if your scatter and leakage application require measurements at a short distance, long-distance, in a fixed position, or sweep, with a click you can select the 10 cm² or 100 cm² area for your measurement.
Stand on a table, use by hand, or mount on the included tripod, the RTI Scatter Probe is quick, simple, and easy to position.
The anti-slip surface also allows safe positioning facing upwards without sliding.
With the standard camera tripod thread, the probe can be mounted to any tripod or jig!
Specifications RTI Scatter Probe
Connector typeUSB Type C
Cable5 m, USB A to C
Extendable with optional USB
active extension cable
Power5 V via USB
Active area10 cm² and 100 cm²
Dimensions139 x 139 x 17 mm
Weight370 g (430 g incl. handle)
Rated range of use10 - 150 keV
80 - 110 kPa
+10 - +40 °C
10 - 80 % rel. humidity
Trig ModeAuto or Manual
Trig Level (auto)5 μGy/h (0.6 mR/h)
or 10 μSv/h
Air Kerma Rate0 - 100 mGy/h (0 - 10 R/h)
±10 % or ±0.3 μGy/h, 0.03
mR/h (ISO N20-N150)
H*(10)0 - 200 mSv/h
±10 % or ±0.6 μSv/h
Mean Energy10 - 150 keV
±10 % or 5 keV
(min rate: 25 μGy/h)
Half Value Layer (HVL)0.1 - 17 mm Al
±10 % or 0.05 mm Al
(min rate: 25 μGy/h)