LoniMover™
Measure CTDI for Wide Beam and Cone Beam CT!
Together with the RTI CT Ion Chamber or CT Dose Profiler, the RTI LoniMover™ is, without a doubt, the easiest and most accurate way to measure CTDI and waveforms for Wide Beam and Cone Beam CT. With the CT Dose Profiler, you will get the FWHM, Geometric Efficiency, and full CTDI with only one measurement through the beam.
The LoniMover™ moves your measuring device in Sweep mode or Step mode:
- In Sweep mode, the LoniMover™, together with the CT Dose Profiler, moves your measuring device at a constant velocity. You also get data for dose width with high reproducibility and high resolution.
- In Step mode, the LoniMover™ and CT Ion Chamber give you well-defined positions.
Download the brochure >
The LoniMover™ is a successful cooperation between RTI Group and LoniTech AB.
$5,775
Updated to v.4.2!
Measure CTDI for Wide Beam and Cone Beam CT according to the IEC 60601-2-44 Ed. 3:A1 standard. Remember, the LoniMover™ works well with any Pencil Ion Chamber of any brand.
Cobia SENSE & FLEX support
Many improvements have been implemented in the new LoniMover™ v.4.2. The biggest one is that the LoniCT software supports Cobia SENSE and Cobia FLEX so measurements can be received with the same software. The software can, of course, still operate simultaneously with Ocean Next™ software, so you can gather all your measured data in your sessions, as well as analyze, save, and autogenerate full reports.
Bluetooth® connection
With this solution, you can seamlessly use the LoniMover™ with a Piranha meter and other solutions from RTI. Even better, with built-in Bluetooth® everything is wireless and easy to set up!
-
Scan up to 300 mm (and the Pencil Ion Chamber can cover 400 mm) LoniCT software can be used with Cobia SENSE and Cobia FLEX Bluetooth connectivity LoniCT software can measure FWHM on pulsed profiles More flexibility in scanning parameters Mechanical fixes More software functions, saving data, and settings!