Cobia FLEX R/F
$6,747.00 – $7,931.00
For Rad/Fluoro as well as Intraoral and CBCT measurements.
Amazingly easy to use, and ideal for straightforward routine inspections. Use Cobia FLEX R/F to measure all the X-ray output parameters: kV, Dose, Dose Rate, Time, Total Filtration, and HVL.
Cobia FLEX R/F comes with Bluetooth and USB connectivity which makes it possible to use it together with the Ocean Next™ software on a laptop or tablet PC. The meter can be connected to all RTI probes available, such as dose probes, CT probes, mAs probes, and light probes.
All prices include freight cost. Pricing does not include Applicable Taxes or Customs Fees.
As compact and flexible as QA can get
The Cobia FLEX R/F offers you the convenience to make your X-ray Quality Control as quick and accurate as possible. It is just as easy as the Cobia SMART but with even more possibilities.
The meter not only has an internal detector but a detector input that offers the ability to connect different probes and ion chambers. There is also optional built-in mAs. The measured values can be read directly from the large and clear display and stored in the Cobia FLEX R/F to read later.
It allows you to determine patient safety every day!
Cobia FLEX R/F users also have the possibility to use a tablet or a PC, save data to a computer, print reports, using analyses, and much more. Our Ocean Next™ software exhibits Cobia’s capabilities and adds benefits that make the workflow more practical and simpler.
Ocean Next™ makes it possible to perform remote X-ray QA measurements with your Cobia Flex R/F. You simply connect to your Cobia, via Bluetooth, or with a USB cable to your PC or Tablet – then measure.
With the addition of Ocean Next™ Professional, the Cobia FLEX R/F truly becomes an indispensable X-ray QA tool – offering a complete system for superior efficiency and compliance. Perform your QA work automatically without any worries: sensitivity, kV ranges, or waveform types.
Read about the Cobia FLEX with mAs Covid-19 Kit >
Cobia FLEX R/F key features
- Easy to position, no position dependence
- Large, rotatable display
- Log/History function
- Pulsed radiation analysis
- Full Auto range for kV, TF, and Sensitivity
- Built-in mAs (optional)
- "Plug n Play" function
- Bluetooth and USB communication
- Solid-state detectors = no need to compensate for temperature and pressure
- Built-in energy compensation
- Can be used together with ion chambers
- Automatic recognition of external probes
- Long-lasting rechargeable battery
- Always free firmware upgrades
- Up to ten-year warranty
- Two-year Calibration Cycle
Cobia FLEX R/F general
Weight (approx.)280 g
Size140 x 78 x 28 mm³
Power sourceInt. battery / Ext. power supply
Battery life10 – 20 hours
DisplayColor, 320 x 240 pixel
Extended WarrantyUp to ten years
Calibration CycleTwo years
StandardComplies with relevant parts of the standards IEC 61674 and IEC 61676 for dosimetric instruments
Internal mAs (optional)
Ranges0.1mAs – 999 As
1 – 930 mA.
0.01 mAs/pulse– 999 As/pulse.
1 – 930 mA/pulse.
Inaccuracy1 % or ±0.1 mA
Sampling time83.33 – 3000 samples/s
Recording time7–130 s
Cobia FLEX R/F measuring parameters
Tube volt.38 – 155 kVp (±2 %)
Time0,33 ms – 9999 s (±1 % or ±0.33 ms)
3 – 9999 pulses
Dose70 nGy – 1700 Gy (±5 %)
8 μR – 200 kR (±5 %)
Dose Rate2.5 µGy/s – 175 mGy/s (±5 % or ±25 nGy/s). 0.3 mR/s – 20 R/s (±5 % or ±2.5 μR/s). 17 mR/min – 1.2kR/min (±5 % or ±0.15 mR/min.
Auto CompensationAll dose parameters are automatically compensated for using measured kVp and TF over their specified ranges.
HVL1.2 – 14 mm Al HVL (±10 % or ±0.2 mm)
Total Filtration1.0 – 90 mm Al (±10 % or ±0.3 mm Al)
Pulse frequency1/6 – 260 Hz (±1 %)
Dose/Pulse10 nGy/p – 600mGy/p (±5 %).
1.1 μR/p – 66 R/p (±5 %)
Min. Exp. Time0.1 ms
Sensitivity67 nGy and 25 μGy/s or
110 nGy and 2.5 μGy/s
The RTI Dose Probe is an external dose probe, designed to perform very low dose rate measurements, for instance, on image identifiers. The probe is very small to avoid or minimize interference with AEC (Automatic Exposure Control) on X-ray equipment. This also enables it to fit into the table bucky. Since it is a solid-state […]
Measures the brightness on monitors with the same spectral response as the human eye. The RTI Light Probe is designed to comply with the needs of QA in modern X-ray departments. With a monitor and a lux adapter, the Light Probe measures the brightness on monitors and film viewing boxes and the ambient light in […]
The RTI MAS-1 probe is an invasive probe for the measurement of mA and mAs. Together with Piranha or the Cobia SENSE, direct reading of mA and mAs, as well as waveform, are obtained. The probe connects to the mAs socket in the X-ray generator and to the multimeter. It can be used to measure […]
The simple way of non-invasive measurements The RTI MAS-2 probe is a clamp-on probe for the non-invasive measurement of mA (tube current) and mAs. Safe and easy to use The RTI MAS-2 probe is simply clamped onto the high voltage cable and then ready for measurements. No connection inside the X-ray generator is needed. Together […]
RTI CT Dose Profiler probe for use with Piranha, Cobia Flex, or Cobia Sense (with PC com). The CT Dose Profiler is used for the evaluation of CT and CBCT systems. The probe fits into standard phantoms used for CTDI measurements.
The CT Ion Chamber is a cylindrical pencil-shaped ionization chamber. It is intended for CTDI measurements free-in-air or in a phantom.
Designed especially for mammographic measurements The Ion Chamber Magna 1cc is designed for mammography dose measurement. The Ion Chamber Magna 1cc has an excellent energy response, why it can be used for radiographic applications too. The Ion Chamber Magna 1cc is the ideal choice for two reasons; Evaluations of Magna ionization chambers show a response within […]
The DAP Chamber is the perfect tool for field calibration of orthodontic X-ray equipment. You can measure with just one click – fast, easy, and accurate, ensuring your quality control process runs safely and smoothly. The DAP Chamber comes in two sizes – 86 x 86 mm and 147 x 147 mm – where the […]
The RTI Chamber adapter is an external module for connecting ion chambers to the Piranha, Cobia Flex, or Cobia Sense. Supports ion chambers with LEMO triaxial connectors (e.g. RTI CT Ion Chamber, DAP chamber, and Magna 1cc mammography ion chamber). Measuring range: 10 pA – 0.7 μA Accessories: BNC and TNC triaxial to LEMO adapters, […]
10″ Tablet PC display for wireless or USB communication with Piranha and Cobia. The tablet comes with a detachable keyboard, Windows 10, installed Ocean Next™ software, built-in Bluetooth, charger, and all necessary items to make it a user-friendly & versatile remote display to your RTI meter.