Piranha CT
Fast and accurate CT dose measurements
The well-known Piranha CT X-ray QA meter measures and presents all parameters instantly and simultaneously. It measures kVp, Time, Total Filtration, CTDI parameters, dose length product, and presents Waveform.
Several important parameters can also be measured such as CTDI100, CTDIw, CTDIvol, DLP, FWHM, Geometric efficiency, and tube current variations. Choose your Piranha CT with CT Dose Profiler or Ion chamber.
Read about our pre-paid calibration and extended warranty.
$18,375
A complete QA solution
The Piranha CT X-ray meter comes ready to use with everything you need. It is really an all-in-one multifunction meter. Connect to your computer wireless or via USB for a complete QA system.
Position Check feature
The unique feature of the Piranha CT X-ray meter makes it possible to check the position of the detector before measuring. By using the Position Check function, you can verify that the detector area is fully irradiated. Possible field inhomogeneities are also neutralized.
CT dose profiles
Use with RTI’s Chamber Adapter, Ion Chamber, and CT Dose Profiler for deep analysis of CT dose profiles.
- All-in-one multifunction X-ray meter
- Solid-state detectors = no need to compensate for temperature & pressure
- Built-in energy compensation
- Can be used together with ion chambers
- Wide-range detection of total filtration
- 100 meters Bluetooth range
- Unique detector design to minimize position and rotation dependence
- Automatic recognition of external probes
- Small, compact, and robust – easy to position
- Backscatter protected
- Long-lasting rechargeable battery
- Always free firmware upgrades
- Upgradable to any Piranha model
- Up to ten-year warranty
- Two-year Calibration Cycle
-
Size 133 x 75 x 26 mm Weight Approx. 400 g Display PC or Windows Tablet Software Ocean Next™ software for X-ray QA Database support Yes Interface type Built-in Bluetooth and USB Detector Position Check Yes Simultaneous Dose Measurements Yes - up to two detectors simultaneously Use of Dose Detector with Active AEC Yes - RTI Dose Probe or RTI T20 Bluetooth range 100 m free-in-air USB cables Included Power source Rechargeable Li ion battery / Ext. power supply Battery life Approx. 15 hours Battery tested According to UN 38.3 No. of exposures needed for measurement One Min. exposure time 0.1 ms Memory Unlimited Operating temperature 15 °c – 35 °c Storage temperature -10 °c - +50°c Waveform Sampling rate 4 – 2000 samples/s Waveform recording time 1024 ms – 524 s Backscatter Protection Yes - main unit, RTI Dose Probe, and RTI T20 Warranty Two years Extended Warranty Up to ten years Calibration Cycle Two years Standard Complies with relevant parts of the standards IEC 61674 and IEC 61676 for Dosimetric instruments EMC Tested According to IEC 61326-1:2012 PTB Approval DE-17-M-PTB-0070 -
Tube Voltage 45 – 155 kV (±1.5 %) Time 0.1 ms – 2000 s (±0.5 % or ±0.5 ms) Total Filtration 1 – 90 mm Al (±10 % or ±0.3 mm) HVL 0.72 – 13 mm Al (±10 % or ±0.2 mm) Pulses 1 – 65535 pulses (±1 pulse) -
Dose rate range 67 nGy/s-2.2 Gy/s. 0.46 mR/min - 15000 R/min Inaccuracy ±5 % or ±15 nGy/s Spatial resolution 0.25 mm -
Air kerma rate 0.3 mGycm/s to 3 Gycm/s Inaccuracy ±5 % or ±0.03 mGycm/s Connector type LEMO triaxial Cable 2 m, low noise triaxial Active volume 16 cm³ Active length 300 mm Diameter 12 mm, 12.6 incl O-rings Typical leakage ±20 fA Radiation quality 70 - 150 kV Sensitivity 30 mGycm/nC Energy Dependence ±1 %
RTI Light Probe
Designed to comply with the needs of QA in modern X-ray departments The RTI Light Probe measures the brightness on monitors with the same spectral response as the human eye. With a monitor and a lux adapter, the RTI Light Probe measures the brightness on monitors and film viewing boxes and the ambient light in [...]
Read moreRTI MAS-1
The simple way of invasive measurements The RTI MAS-1 is an invasive probe for the measurement of mA and mAs. Together with Piranha or the Cobia SENSE, direct reading of mA and mAs, as well as waveform, are obtained. The probe connects to the mAs socket in the X-ray generator and to the multimeter. It [...]
Read moreLoniMover™
Measure CTDI for Wide Beam and Cone Beam CT! Together with the RTI CT Ion Chamber or CT Dose Profiler, the RTI LoniMover™ is, without a doubt, the easiest and most accurate way to measure CTDI and waveforms for Wide Beam and Cone Beam CT. With the CT Dose Profiler, you will get the FWHM, [...]
Read moreRTI MAS-2
The simple way of non-invasive measurements The RTI MAS-2 probe is a clamp-on probe for the non-invasive measurement of mA (tube current) and mAs. Safe and easy to use. The probe is simply clamped onto the high voltage cable and then ready for measurements. No connection inside the X-ray generator is needed! Together with your [...]
Read morePiranha Premium ALU Case
A solid aluminum case The lightweight aluminum Piranha Premium ALU Case is not only attractive, but it is also just “the right size” to provide space for the Piranha and all its accessories included in the popular Piranha Premium Kits. It gives the Piranha user the perfect solution for transporting and storing the RTI X-ray [...]
Read moreCTDI Phantom Set
Adapt the size of the phantom RTI CTDI Phantom Sets simulates adult and pediatric head and body of patients for QA testing of computed tomography (CT) systems. RTI offers two different CTDI Phantom sets. Choose two (2) or three (3) parts. Both have nested modules to allow adaptation to the size required by the selected [...]
Read morePiranha Panoramic Holder
Attach your Piranha vertically The Piranha Panoramic Holder is designed for attaching the Piranha DENTAL meter to dental panoramic equipment or vertical mounting. It can be mounted with an adjustable strap or magnets (included). [...]
Read moreRTI Dose Probe
For low dose rate measurements The RTI Dose Probe is an external dose probe designed to perform very low dose rate measurements, for instance, on image intensifiers. Use with Piranha, Cobia Dental, Cobia Flex, or Cobia Sense. (The probe can also be used with the Mako system using a Mako Legacy Module.) The probe is [...]
Read more