Probes and Accessories for your RTI solution

Ocean Next™ software
The new power in X-ray QA software. If you want a swift, easy-to-use application for routine controls, or a customized application with workflow, automatic tests, and traceability, the new Ocean Next™ software provides you with both options.

RTI Scatter Probe
A leakage and scatter detector in one! A rugged, flat, solid-state detector for leakage and scatter detection in X-ray environments. Its unique design - two separate detector areas of 10 and 100 cm² - fulfills current regulations and standards for X-ray leakage and scatter measurements.

RTI MAS-2
The simple way of non-invasive measurements The RTI MAS-2 probe is a clamp-on probe for the non-invasive measurement of mA (tube current) and mAs. Safe and easy to use The RTI MAS-2 probe is simply clamped onto the high voltage cable and then ready for measurements. No connection inside the X-ray generator is needed. Together […]

RTI MAS-1
The RTI MAS-1 probe is an invasive probe for the measurement of mA and mAs. Together with Piranha or the Cobia SENSE, direct reading of mA and mAs, as well as waveform, are obtained. The probe connects to the mAs socket in the X-ray generator and to the multimeter. It can be used to measure […]

DAP Chamber
The DAP Chamber is the perfect tool for field calibration of orthodontic X-ray equipment.  You can measure with just one click – fast, easy, and accurate, ensuring your quality control process runs safely and smoothly. The DAP Chamber comes in two sizes – 86 x 86 mm and 147 x 147 mm – where the […]

RTI CT Dose Profiler
RTI CT Dose Profiler probe for use with Piranha, Cobia Flex, or Cobia Sense (with PC com). The CT Dose Profiler is used for the evaluation of CT and CBCT systems. The probe fits into standard phantoms used for CTDI measurements.

RTI Dose Probe
The RTI Dose Probe is an external dose probe, designed to perform very low dose rate measurements, for instance, on image identifiers. The probe is very small to avoid or minimize interference with AEC (Automatic Exposure Control) on X-ray equipment. This also enables it to fit into the table bucky. Since it is a solid-state […]

RTI T20 Dose Probe
The RTI T20 Dose Probe is a solid-state detector dedicated for measurements on Rad/Fluoro systems when it is crucial that the detector itself does not have any effect on the system output or disturbs the X-ray beam. It was developed for measurements of the patient entrance dose (skin dose) and the maximum dose rate in […]

RTI CT Ion Chamber

The CT Ion Chamber is a cylindrical pencil-shaped ionization chamber. It is intended for CTDI measurements free-in-air or in a phantom.

RTI Light Probe
Measures the brightness on monitors with the same spectral response as the human eye. The RTI Light Probe is designed to comply with the needs of QA in modern X-ray departments. With a monitor and a lux adapter, the Light Probe measures the brightness on monitors and film viewing boxes and the ambient light in […]

Piranha Outdoor Case
The Piranha Premium Outdoor Case is a tough, dent-resistant, transport for your Piranha Premium System. If a tough, dent-resistant, transport option is preferable, the RTI Outdoor Carrying Case may be right for you. Made with a rugged, high impact polypropylene exterior, this case is waterproof and can take a beating. Inside, it has many of […]

Piranha Premium ALU Case
The light-weight aluminum Piranha Premium ALU Case is not only attractive, but it is also just “the right size” to provide space for the Piranha and all its accessories included in the popular Piranha Premium Kits. It gives the Piranha user the perfect solution for transporting and storing the RTI X-ray QA test tools. Imagination […]

Soft Shell Case
The Soft Shell Case is a perfect solution for storing your Cobia or Piranha. The soft shell case is the perfect storage solution for the Cobia Smart or Piranha along with power supply, tablet, and a couple of probes.

10″ Tablet PC 
10″ Tablet PC display for wireless or USB communication with Piranha and Cobia. The tablet comes with a detachable keyboard, Windows 10, installed Ocean Next™ software, built-in Bluetooth, charger, and all necessary items to make it a user-friendly & versatile remote display to your RTI meter.

RTI Dose Probe Suction Cup Holder
For accurate positioning of the RTI Dose Probe – in any position from vertical to upside down!

Philips Dose Probe Holder
Philips Dose Probe Holder is a stand to fixate RTI Dose Probe in defined positions for scatter measurements (on Dexa and other systems).

Philips Piranha Holder
Philips Piranha Holder – for the positioning of Piranha on Philips EDL-stand.

GE Piranha Holder for Essential, DS, 2000D, DMR
The GE Piranha Holder for Essential is developed for use with the GE Mammo IQST Jig and the Senographe Essential, DS, and 2000D from GE. The holder offers easy positioning and ensures that the Piranha is correctly positioned for every QA X-ray measurement.

GE Piranha Holder for Pristina
The GE Piranha Holder for Pristina is developed for use with the GE Mammo IQST Jig and the Senographe Pristina from GE. The holder offers easy positioning and ensures that the Piranha is correctly positioned for every X-ray QA measurement.

GE Vascular Holder
The GE Vascular Holder is designed for accurate positioning of the Piranha and Barracuda Dose Probes on the GE Vascular system.

GE Dose Probe Holder
GE Dose Probe Holder is designed for accurate positioning of the Piranha and Barracuda Dose Probe. The Dose Probe Holder can be used together with 9744004-00 Piranha Holder & Stand D8.

GE Piranha Holder and Stand D8
This stand includes a base plate that can be used as a holder for the Piranha main unit. This allows accurate positioning of the Piranha for special applications.

Piranha Mammo Holder
Piranha Mammo Holder (for Hologic, Fuji, and others) The Piranha Mammo Holder is developed for easy positioning of the Piranha in the reference point for almost every mammo unit. The holder is specifically designed for Hologic Selenia and Fuji Amulet.

RTI Dose Probe Scatter Holder
The RTI Dose Probe Scatter Holder is a stand to fixate RTI Dose Probe in defined positions for scatter measurements on dexa systems. Read more about our calibration.

HVL Filter Holder
Filter holder for 33 x 33 mm or 100 x 100 mm filter size.

HVL Stand
Adjustable stand for easier positioning of the HVL filter for RTI Dose Probe, Piranha device, Barracuda MPD, and R100. Filter holder, for 33 x 33 or 100 x 100 mm filter size. HVL filter kits sold separately.

HVL Filter Kits
NEW HVL aluminum filter kit for traditional HVL measurement on R/F, CT, Dental, and Mammography. 99.5% high pure aluminum. Included filters: R/F: 2 x 0.50 mm, 3 x 2.0 mm, 3 x 1.0 mm Mammo: 3 x 0.10 mm, 3 x 0.20 mm, 1 x 0.50 mm

RTI Dose Probe Flexi Stand
The RTI Dose Probe Flexi Stand will normally be placed on the patient table. It is developed for use with RTI Dose Probe, for vertical and/or horizontal exposures.

Cobia Vertical Holder
The Cobia Vertical Holder is designed for attaching the Cobia to vertical surfaces like a wall bucky, or Cone Beam X-ray units. The holder comes with an adjustable strap with a suction cup for safe mounting.

Piranha Panoramic Holder/Vertical Holder v.4
Vertical positioning. This holder is designed for attaching the Piranha to dental panoramic equipment or vertical mounting. It can be mounted with an adjustable strap or magnets.

Phantom Adapter Plug for DCT 10
Phantom Adapter Plug for DCT 10 for the CT probe DCT 10 to fit in a standard CT phantom. Length 150 mm, diameter 12.5 mm. 

RTI Chamber Adapter
The RTI Chamber adapter is an external module for connecting ion chambers to the Piranha, Cobia Flex, or Cobia Sense. Supports ion chambers with LEMO triaxial connectors (e.g. RTI CT Ion Chamber, DAP chamber, and Magna 1cc mammography ion chamber). Measuring range: 10 pA – 0.7 μA Accessories: BNC and TNC triaxial to LEMO adapters, […]

Adapter Cables
RTI provides a range of adapter cables. These enable you to connect many different types of ionization chambers.

General mA Test Point Cable
The General mA Test Point Cable is made for special mA accuracy tests for AMX-4, Optima, Jedi, and Fluoroscan. No need to use an oscilloscope for setting up, configuring, triggering properly, calculating proper values, etc. Connect the leads to test points and use with Piranha meter and Ocean software.

LoniMover™
Together with RTI CT Ion Chamber or CT Dose Profiler, the RTI LoniMover™ is, without a doubt, the easiest way to measure CTDI and waveforms for Wide Beam and Cone Beam CT.

Visi-X
The Visi-X is optimized for light field/X-ray field alignment measurements. Simply darken the X-ray room and place your Visi-X under the X-ray tube. Adjust the light field, and make your exposure. The radiation field will immediately be visualized by the glow of the special phosphor compound. It can also be used for checking the centering of the bucky tray.

RTI Slit Camera
For X-ray focal spot measurements, to assure that the X-ray tube focal spot size is within acceptable limits. The Slit Camera can be rotated 90 degrees in the holder.

Ruler Set Nova Rad
The Nova Rad is dedicated to check and document light field/X-ray field alignment. Nova Rad consists of fluorescent rulers with movable, metal markers. Four sides of fields up to 45 x 45cm (18” x 18”) can be measured in one exposure.